支援
跳線設定
硬碟機連接座腳位使用配置
以下跳線設定資訊適用於Toshiba舊款硬碟產品線，如MK-1003MAV, MK1401MAV, MK-1302MAN, MK-2101MAN等。
要使用主控模式(Master)，請將跳接設定J2保持在開路狀態，當J2以跳線連接時，硬碟則設定為纜線選擇(Cable Select)，如果接腳28 = LOW，硬碟為主控模式，如果接腳28 = HIGH，硬碟則為從屬模式(Slave)。跳接點J1為工廠專用的保留接點。
| PIN | SIGNAL | PIN | SIGNAL |
|---|---|---|---|
| 1 | -HOST RESET | 2 | GROUND |
| 3 | HOST DATA 7 | 4 | HOST DATA 8 |
| 5 | HOST DATA 6 | 6 | HOST DATA 9 |
| 7 | HOST DATA 5 | 8 | HOST DATA 10 |
| 9 | HOST DATA 4 | 10 | HOST DATA 11 |
| 11 | HOST DATA 3 | 12 | HOST DATA 12 |
| 13 | HOST DATA 2 | 14 | HOST DATA 13 |
| 15 | HOST DATA 1 | 16 | HOST DATA 14 |
| 17 | HOST DATA 0 | 18 | HOST DATA 15 |
| 19 | GROUND | 20 | KEY |
| 21 | DMARQ | 22 | GROUND |
| 23 | - HOST DIOW | 24 | GROUND |
| 25 | - HOST DIOR | 26 | GROUND |